Technique of Strength Increasing of Working Pipeline Parts with the Help of Well-Bond Goints
DOI:
https://doi.org/10.20535/1810-0546.2015.2.91531Keywords:
Coupling, Nondestructive control, Diagnostics, Repair, Gas passage line, Pipeline, PressureAbstract
Background. Getting high efficiency of enhancing pipeline of small and medium diameter using well-bond joints is complicated, because of the low modulus of elasticity compounds used to form the under-join layer.
Objective. Development of the strength increasing technique of the high pressure pipelines parts using the well-bond joints is the aim of this study.
Methods. Strength increasing technique of a working pipeline with the help of well-bond joints was used.
Results. The strength increasing technique of the high pressure pipelines parts using the well-bond joints, which are filled with molten metal with a high modulus of elasticity, is offered. The operations of forming the under-joint layer with parameters providing achievement of maximum tension decrease level in strengthened pipe providing and equal load distribution between a side of a pipe part under repair and joint covering are considered.
Conclusions. The offered technique gives an opportunity to increase efficiency of strengthening the medium and small pipes diameter pipes.References
M.V. Bekker et al., Repair of Gas-Main Pipelines under Pressure. Kyiv, Ukraine: Kyi, 2008, 240 p. (in Ukrainian).
Gas-Main Pipelines, Arc Welding Repair in Operating Conditions, GBN V.3.1-00013741-12:2011, Ministry of Energetics and Coal Industry ofUkraine, Kyiv, 2011 (in Ukrainian).
G.S. Tymchik and A.A. Podolian, “The quality control system installation glued-welded joint on the trunk gas pipeline under the high pressure”, Naukovi Visti NTUU “KPI”, no. 6, pp. 138–144, 2012 (in Russian).
Technological Instruction for Gas-Main Pipelines under Pressure with the Use of Arc Welding, DK “Ukrtransgas”,Kyiv,Ukraine, 2000, 96 p. (in Ukrainian).
I.V. Oryniak et al., “Method for repair of operating pipeline by means of couplings with inner filling”, UA Patent 98440, May 10, 2012 (in Ukrainian).
Composites Handbook, Dzh. Liubin, Ed. Moscow, Russia: Mashinostroenie, 1988, book 1, 448 p., book 2, 584 p. (in Russian).
A.A. Podolian et al., “Method for reinforcement of a pipeline by means of couplings with inner filling with control of quality of works (variants)”, UA Patent 98601, May 25, 2012 (in Ukrainian).
G.S. Tymchik and A.A. Podolian, “Techonlogy of ultrasonic control of the well-bonded pipe coupling space filling”, Naukovi Visti NTUU “KPI”, no. 2, pp. 103–109, 2014 (in Russian).
Downloads
Published
Issue
Section
License
Copyright (c) 2017 NTUU KPI Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under CC BY 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
